HD Видеоконференции на OpenMCU



Добавлено зеркало для сайта и форума. http://videoswitch.ru/
Если будут проблемы с доступом - все изменения так же будут отображены в github репозитории.

Автор Тема: Testing openmcu failed with sip protocal.  (Прочитано 2867 раз)

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Testing openmcu failed with sip protocal.
« : 16 Ноябрь 2015, 04:35:07 »
Hi, all

I'm testing openmcu 4.1.6 in sip protocal, but it's failed with linphone call to openmcu, I followed admin guide version 1.01 to setup all configuration but compile it by source code.

Linphone VP8 disabled, video always checked, name id configured. Openmcu only setup admin group and nothing special. Linphone just return "unsupported media type" and auto hang up the call, but MyPhone is succeed to test h322plus protocal.

If I think it might be linphone's codec can't compatiable with opemncu 4.1.6?



BR,
Bendney Yu

blanchae

  • Постоялец
  • ***
  • Сообщений: 155
  • Карма: 5
    • Telecomworld 101
Re: Testing openmcu failed with sip protocal.
« Ответ #1 : 16 Ноябрь 2015, 22:27:07 »
This is the source of your problem: "but compile it by source code", it makes it very difficult to troubleshoot if something didn't compile properly.

Can you call two linphones to each other?

What does the OpenMCU_ru status screen show?
« Последнее редактирование: 20 Ноябрь 2015, 19:55:23 от blanchae »

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #2 : 17 Ноябрь 2015, 05:47:34 »
I used two linphone version 3.8.5 call each other with registering in FreePBX, and all looks good including video.

I tried linphone version from version 3.8.0 to 3.9.0 to call room in openmcu, also ekiga softphone have same sip call result to return "unsupported media type", ekiga looks good for communicating with each other with h323plus call.

This the critical message from openmcu:

16:44:46.886
   send 275 bytes to udp/[192.9.201.73]:5061 at 01:14:51.232387:
   ------------------------------------------------------------------------
   SIP/2.0 100 Trying
   Via: SIP/2.0/UDP 192.9.201.73:5061;branch=z9hG4bK.0UcrzNQx4;rport=5061
   From: <sip:bendney@10.10.0.10>;tag=-5gDLkWxt
   To: <sip:1001@192.9.201.75>
   Call-ID: JqOjEu2zL6
   CSeq: 20 INVITE
   Server: OpenMCU-ru/4.1.6 (sofia-sip-1.12.11)
   Content-Length: 0
   ------------------------------------------------------------------------

16:44:46.889
   send 309 bytes to udp/[192.9.201.73]:5061 at 01:14:51.235279:
   ------------------------------------------------------------------------
   SIP/2.0 415 Unsupported Media Type
   Via: SIP/2.0/UDP 192.9.201.73:5061;branch=z9hG4bK.0UcrzNQx4;rport=5061
   From: <sip:bendney@10.10.0.10>;tag=-5gDLkWxt
   To: <sip:1001@192.9.201.75>;tag=4FyNyjDmHmtyp
   Call-ID: JqOjEu2zL6
   CSeq: 20 INVITE
   Server: OpenMCU-ru/4.1.6 (sofia-sip-1.12.11)
   Content-Length: 0
   ------------------------------------------------------------------------

BR,
Bendney

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #3 : 18 Ноябрь 2015, 06:15:31 »
Hi, all

anyone can help me ?

BR,
Bendney

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #4 : 18 Ноябрь 2015, 12:27:54 »
I install openmcu-ru package version 3.48 on ubuntu 10.04, and all looks good, then I compile it by souce code with looks good only video pipe problem. I will try newer openmcu version on ubuntu 14.04 these days.

May be it's the compile source code issue, I compile it on Archlinux with all libraries updated, and may latest ffmpeg or others cause the "unsupported media type". I will keep digging out until issue resolved. if someone have some clue for these, let me know, I 'll appreciate!


Br,
Benndey

blanchae

  • Постоялец
  • ***
  • Сообщений: 155
  • Карма: 5
    • Telecomworld 101
Re: Testing openmcu failed with sip protocal.
« Ответ #5 : 18 Ноябрь 2015, 21:04:02 »
I found that version 3.48 was not ready for prime time and 4.1.3 fixed all the problems that I was having.

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #6 : 19 Ноябрь 2015, 04:49:38 »
Ok, I'll try 4.1.3 or later version.

By the way, do you install OpenMCU by compile source code to setup OpenMCU manually on Linux distro ? it looks like need to install dependencies first(FFmpeg ...)

blanchae

  • Постоялец
  • ***
  • Сообщений: 155
  • Карма: 5
    • Telecomworld 101
Re: Testing openmcu failed with sip protocal.
« Ответ #7 : 20 Ноябрь 2015, 19:54:06 »
I avoid compiling it unless I'm a developer. I follow the instructions in the beautifully written OpenMCU-ru Admin Guide for standalone installation as it is extremely simple and works out of the box.

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #8 : 20 Ноябрь 2015, 20:22:07 »
Ok, I used build script to build OpenMCU 4.1.6 in ubuntu 14.04, and it runs successfully.  Then I tried to build it in Archlinux with build-in script option, and there is still have reject message "unsupported media type",  so I think it maybe OpenMCU  incompatible with  some newer dependencies.

beebuu

  • Новичок
  • *
  • Сообщений: 20
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #9 : 14 Июнь 2017, 09:18:36 »
I got same problem when i compile in ubuntu 16.04. Hope develper can fix it.... :(

bendney

  • Новичок
  • *
  • Сообщений: 31
  • Карма: 0
Re: Testing openmcu failed with sip protocal.
« Ответ #10 : 14 Июль 2017, 20:30:45 »
I got same problem when i compile in ubuntu 16.04. Hope develper can fix it.... :(

Could you post errors? Maybe I can help.